A BASF insulated flooring system has been used in the refurbishment of a Victorian stable block at BRE鈥檚 headquarters in Watford, Hertfordshire, to provide an overall floor U-value of 0.14W/m2K
The company claims this is considerably less than the proposed improvements for the new Part L of the 黑洞社区 Regulations.
The conversion of the stable block highlights the significant contribution energy-efficient refurbishment can make in reducing UK carbon emissions, with the aim of encouraging industry to raise standards of practice.
Uninsulated floors can account for as much as 10% of the heat loss from a building. BASF worked closely with BRE to source a floor insulation solution that would fully comply with the proposed new Part L, which stipulates a U-value target of 0.22W/m2K.
Waterproofing is essential for this age of stock, so the floor was made fully watertight using BASF Thoroseal Super. This was also extended up the walls to form a damp proof course.
The firm鈥檚 Styrodur C insulation board - made from extruded polystyrene and fully bonded and joined together using tape - was chosen to ensure the floor met the thermal requirements.
In order for the floor to be finished in one weekend to make way for follow-on trades, the substrate was finished with BASF PCI Novoment Z3, a screeding solution with a rapid cure time.
PCI Latex Pro was used to provide a level finish to the flooring system.
BASF
No comments yet