黑洞社区

It might only be half built but the roof of Glasgow鈥檚 Museum of Transport offers a splendid panorama of the city鈥檚 religious heritage. 鈥淓verywhere you look there are church spires,鈥� says Jim Ward, project director for BAM, the contractor responsible for delivering the building. 鈥淚鈥檝e just counted 20 and that鈥檚 without trying too hard.鈥�

The view has a specific meaning here because the Glasgow skyline has partly inspired the roof we鈥檙e standing on. Unlike the well-ordered ecclesiastical architecture, however, it jags up and down in a capricious range of gables and valleys. Close up, it feels like a gothic mountain range: the tallest peak rises 10m above our heads, with sides that are almost sheer. 鈥淭he guys on site call it the cathedral ridge,鈥� says Ward.

Ward has a calm, quietly confident manner, an essential quality if you鈥檙e charged with delivering a Zaha-designed project. Like all her jobs, this one pushes at the boundaries of what鈥檚 possible with steel, concrete and glass. For example, the seesaw roof isn鈥檛 supported by internal columns; instead it spans the entire 35m width of the building and extends 167m along its length. In plan, the building is shaped like a river meandering through a valley. Johannes Hoffman, the project architect for Zaha Hadid Architects, says this is deliberate: the design reflects the regeneration of the docks, which have become part of the city again. 鈥淭he elevations suggest the city, the extruded shape suggests the Clyde,鈥� he says.

Understandably, this kind of complex stuff caused a few worries for its client, Glasgow council. Memories of the Scottish parliament are still fresh in these parts, and the council could not be seen to be throwing council taxpayers鈥� money away on a civic vanity project. As it was, the council originally expected to spend 拢50m but had to revise this to 拢74m: not good, but not a total PR disaster either.

Every avenue was explored to contain costs. 鈥淥ne suggestion was to put a flat roof on it as you can鈥檛 see most of it from the ground,鈥� says Ward. 鈥淭he reaction from the architect was volatile to say the least.鈥� Fortunately Ward didn鈥檛 share this view and embraced the challenge of staying true the design. 鈥淵ou have got to enter into the spirit of it 鈥� you can鈥檛 dumb it down,鈥� he says.

The team has stayed largely true to the original design 鈥� the structure is complete and the cladding is going on. But maintaining the more complex aspects of the design intent and keeping the building within budget hasn鈥檛 been easy.

The steel structure was complex and difficult to build (see box below) but it was the cladding that really exemplified the tricky balance between design, buildability and cost. 鈥淚t鈥檚 been one of the hot potatoes on this job,鈥� says Ward. The 16,500m2 of cladding consists of 24,000 hand-made zinc sheets used to make a standing seam roof.

The lines of the seams start on the side of the building, go over the perimeter, sweep up and down over the peaks and troughs of the roof and continue over the other side to the ground.

The roof impasse

The zinc panels sit on top of the roof 鈥渂uild-up鈥�. This consists of metal decking fixed to the steel structure followed by a vapour-control membrane and insulation. Because it鈥檚 too difficult to get the heavy steel structure to follow precisely the desired contours of the roof metal, brackets fixed to the decking are used to vary the height of the build-up from 375mm up to 1500mm.

The brackets support plywood sheeting that has to be perfectly positioned as this in turn supports the zinc. 鈥淎ny mistakes will carry through the layers and you鈥檒l see it in the zinc,鈥� explains Geoff Stothert, contract manager for specialist Varla, which is doing the roofing package. A total of 65,000 brackets are being used, their lengths adjustable to ensure the final position of the roof matches the 3D computer model sitting in Zaha Hadid鈥檚 studio.

鈥淕etting it right on the flat sections is fairly straightforward, but it needs an incredible amount of surveying to get it right on the curved areas,鈥� says Stothert.

Getting to this stage has tested the relationship between architect and contractor. 鈥淶aha Hadid was very particular about how the design was built,鈥� says Ward. 鈥淚nitially it was a case of this is what we want and this is how we want it built. They came up with a contractor to do the envelope. But they wouldn鈥檛 give us the programme and the cost was astronomical. The relationship was never going to go forward if they couldn鈥檛 give us an outline commitment to cost and programme. So we turned to the UK market for alternatives.鈥� That is where Varla came in.

Early on, value engineering saw off the original stainless steel in favour of much cheaper pre-weathered zinc, a product made by a company called Rheinzink. A full-size mock-up was built to test the design and get an idea of what it would look like. According to Ward the architect was not happy because the zinc looked wavy, a phenomenon known as 鈥渙il canning鈥�. 鈥淗adid wanted it to be mirror flat,鈥� he says, adding that they refused to sign off the mock-up. For his part, Hoffman says it just wasn鈥檛 up to scratch.

鈥淚t wouldn鈥檛 have been acceptable to us on the building as it didn鈥檛 come up to our expectations,鈥� he says.

Varla and BAM say there was little they could do to reduce the oil canning. 鈥淭hey didn鈥檛 swallow it without a fight,鈥� says Ward. 鈥淲e got the Rheinzink representative here and Hadid flew an expert in from Germany. The answer was they still weren鈥檛 happy and weren鈥檛 prepared to sign it off. We said find us any building in the world you like and we will go and visit it and that will be the benchmark for the job. We are still waiting for that building.鈥�

Ward says Varla and BAM were stuck because they couldn鈥檛 start work until the mock-up was signed off. In the end the team agreed to go ahead and put up a section of roof in a bid to break the impasse. Luckily this did the trick. 鈥淚t was a very good piece of work and that was the benchmark we鈥檙e using for the whole building,鈥� says Hoffman.

Despite this hiccup, Ward says the design has been well thought out. He adds that mutual suspicion has blossomed into mutual trust. 鈥淣ow they ring up and say they want to discuss how a package should be built,鈥� he says.

According to Stothert it has been a learning curve for all concerned. He says the process was partly a case of Hadid developing a better understanding of how zinc behaves but he also concedes that the work on the roof is better than the mock-up. Hoffman says that, despite the problems, the mock-up was a valuable exercise. 鈥淚t helped the contractor understand the intricacies of the job and test the limits of the material.鈥� He adds that he was pleased with the way BAM and Varla tackled the job. Stothert concedes that Hadid鈥檚 demanding standards have produced a better job. 鈥淭he bar has definitely been raised for us; we鈥檝e learned so much from this job,鈥� he says, adding that the experience has prompted Rheinzink to produce a book showing what can be done with the material.

The cladding is now in full swing and most of the build-up has been completed, although Ward concedes he hasn鈥檛 finalised how they are going to access the cathedral ridge. Varla makes the panels factory from rolls of zinc. Varla takes Hadid鈥檚 3D RhinoCAD model of the roof and converts this into an AutoCAD drawing in which the roof is divided into panels. Varla then manufactures these panels, after adding an allowance for the seam on each side of them.

Some panels are more difficult to make than others; for example, those around the ridges are far more complicated, which means that templates have to be made to double check the shape. And because these panels have a double curve, the seam is added by hand using a machine to tease it into a curve. Up on the roof, the surveyors mark out where the panels are to go, and the seams are folded over by hand once the they are in the right place.

With the steel structure up and the cladding going on, Ward has completed the most difficult parts of the job. The plan now is to finish the perimeter cladding, then do the centre, which frees up space for the landscaping teams to start their package. Internally, the services are going in and some of the glass-reinforced gypsum soffit panels have been installed. Rain penetration will be a problem until the roof build-up is finished 鈥� and rain is a sore point for Ward.

鈥淚t started raining at the end of July and didn鈥檛 stop until September; it鈥檚 etched in my mind,鈥� he says. 鈥淚t鈥檚 unpleasant and any advantage you can take of the longer days is lost. It doesn鈥檛 affect the end date but it interrupts the flow of the work and morale.鈥�

Ward is confident the job will be handed to the client in August next year. Given the way he has tackled this job so far, it鈥檚 a fair bet it will open on time in spring 2011.